MMS® Inspection SPG
Surface measurement made easy.
Reliable surface profile measuring device for optimum paint application in coating processes in heavy corrosion protection.
in the device
Best choice for measuring the surface profile.
With the MMS® Inspection SPG, you can measure the surface profile in minutes. Testing this is very important before corrosion protection coatings are applied. The housing complies with IP65 and protects the measuring device even under the most adverse conditions. This means that you always get reliable measurement results with the simplest handling.
The MMS® Inspection DPM is part of the three-part MMS® Inspection corrosion kit, the Fischer handheld measuring gauges for comprehensive corrosion protection.
Built to last.
Extremely robust thanks to dust- and splash-proof housing
Modern and intuitive user interface.
Rotating display for any viewing angle and in poor lighting conditions
Full measuring control.
Feedback during measurement by light, sound and vibration
Easy one-hand operation through compact design
Designed for coating processes.
Optimum preparation for the application of anti-corrosion coatings
Achieve the highest level of accuracy
Ideal for use in difficult conditions: Robust, ergonomic and easy to operate with one hand – even when wearing gloves.
The peak-to-valley height differences are measured in accordance with ASTM D4417, method B and thus comply with a number of regulations and directives such as SSPC-PA17.
Direct control of the defined measured value tolerance limits by means of a light indicator, sound signal and vibration.
Measured value memory: 10,000 in one batch or 250,000 in 2,500 batches, depending on device version
Dust- and splash-proof according to IP65
Measuring the surface profile depth in accordance with ASTM 4417-B, SSPC-PA 17, SANS 5772, US Navy NSI 009-32 and US Navy PPI 63101-000
Limit value monitoring via light, sound and vibration, depending on device version
Easy data transfer via USB and Bluetooth, depending on the device version
Battery for > 8 h operating time
Automatically rotating display for every viewing angle and in poor lighting conditions
Accuracy: 0 - 100 µm: ≤ 3 µm, 100 - 500 µm: ≤ 3 % of the target value
Measuring range: 0 - 500 μm
- Measuring the surface profile depth
Do you have other applications? Then contact us!