Accessories

Suitable measuring device, individual accessories, best measurement performance.

To match our diverse product portfolio, you will also find a large selection of accessories. In this way, you can always ensure that you can measure absolutely reliably with your measuring device. Whether calibration standards, probes, stands, holders and positioning aids, enlarged contact surfaces or cables suitable for drag chains – our accessories make your daily work easier. We will be happy to advise you on finding the right accessories for your application.

XRF
Tactile
Nanoindentation
Automation

Selection of accessories* for your XRF measuring device:

*Compatibility depends on the respective measuring device

  • Measuring cell for solution analysis of galvanic baths (Fig. 1)
  • Sample stage Zero Background for supporting very thin components and foils (beam trap to suppress the signals of the measuring table) (Fig. 2)
  • Positioning aids for exact positioning and alignment of test parts (Fig. 3)
  • Universal vice for exact positioning of test parts with complex geometry (Fig. 4)
  • Holders (also magnetic) for calibration standards, which hold base material and several calibration foils on top of each other
  • Pressing tool for chips for sample preparation, such as for precious metal chips
  • Vibration damping to reduce the effects of vibration
  • Support plate with 620 mm x 530 mm for Measuring on large PCBs up to 24".
  • And much more
Accessories X-Ray

Selection of accessories* for your tactile measuring device:

*Compatibility depends on the respective measuring device

  • Measuring stand with motorized or manual probe lowering (Fig. 1)
  • Instrument stand for optimal instrument handling with only one hand and protective case (Fig. 2)
  • DMP F-Sample adapter for existing Fischer probes (Fig. 3)
  • Screw measuring device (Fig. 4)
  • Specimen holder for easier applying the probe to surfaces
  • Universal vice for exact positioning of small test pieces of any geometry
  • Guide device for angular probes for convenient reaching of measuring points in bores and recesses
  • Touch pen for easy operation of the touch screen
  • Attachment rings and prism adapters
  • Consumables such as Electrolytes, cannulas or calibration solutions
  • Temperature sensors for temperature compensation
  • And much more
Accessories Tactile

Selection of accessories* for your hardness measuring device:

*Compatibility depends on the respective measuring device

  • Foil clamping device for clamping thin foils or wires (Fig. 1)
  • Micrograph specimen holder for transverse micrograph specimens (Fig. 2)
  • Universal specimen holder (Fig. 3)
  • Heating table for analysis of mechanical properties at temperatures up to 200 °C (Fig. 4)
  • Sound insulation hood for reducing external sound influences
  • Universal vice for clamping objects to be measured with different geometries
  • Atomic force microscope (AFM)
  • And much more
Accessories nanoindentation

Selection of accessories* for your automation solution:

*Compatibility depends on the respective measuring device

  • Tape guide for solid and punched tapes for exact guiding of the measuring product (FISCHERSCOPE® X-RAY® 4000 series) (picture 1 and 2)
  • Device for sample measurements (Fig. 3)
  • Measuring cell for solution analysis of galvanic baths (Fig. 4)
  • Trailing cable up to 30 m (FISCHERSCOPE® MMS® Automation)
  • Calibration fixture for automatic calibration sequence
  • Calibration device for punching grids (FISCHERSCOPE® X-RAY® 4100)
  • Display and keyboard holders
  • Further special requirements after clarification
Accessories automation
  • XRF

      Selection of accessories* for your XRF measuring device:

      *Compatibility depends on the respective measuring device

      • Measuring cell for solution analysis of galvanic baths (Fig. 1)
      • Sample stage Zero Background for supporting very thin components and foils (beam trap to suppress the signals of the measuring table) (Fig. 2)
      • Positioning aids for exact positioning and alignment of test parts (Fig. 3)
      • Universal vice for exact positioning of test parts with complex geometry (Fig. 4)
      • Holders (also magnetic) for calibration standards, which hold base material and several calibration foils on top of each other
      • Pressing tool for chips for sample preparation, such as for precious metal chips
      • Vibration damping to reduce the effects of vibration
      • Support plate with 620 mm x 530 mm for Measuring on large PCBs up to 24".
      • And much more
      Accessories X-Ray
  • Tactile

      Selection of accessories* for your tactile measuring device:

      *Compatibility depends on the respective measuring device

      • Measuring stand with motorized or manual probe lowering (Fig. 1)
      • Instrument stand for optimal instrument handling with only one hand and protective case (Fig. 2)
      • DMP F-Sample adapter for existing Fischer probes (Fig. 3)
      • Screw measuring device (Fig. 4)
      • Specimen holder for easier applying the probe to surfaces
      • Universal vice for exact positioning of small test pieces of any geometry
      • Guide device for angular probes for convenient reaching of measuring points in bores and recesses
      • Touch pen for easy operation of the touch screen
      • Attachment rings and prism adapters
      • Consumables such as Electrolytes, cannulas or calibration solutions
      • Temperature sensors for temperature compensation
      • And much more
      Accessories Tactile
  • Nanoindentation

      Selection of accessories* for your hardness measuring device:

      *Compatibility depends on the respective measuring device

      • Foil clamping device for clamping thin foils or wires (Fig. 1)
      • Micrograph specimen holder for transverse micrograph specimens (Fig. 2)
      • Universal specimen holder (Fig. 3)
      • Heating table for analysis of mechanical properties at temperatures up to 200 °C (Fig. 4)
      • Sound insulation hood for reducing external sound influences
      • Universal vice for clamping objects to be measured with different geometries
      • Atomic force microscope (AFM)
      • And much more
      Accessories nanoindentation
  • Automation

      Selection of accessories* for your automation solution:

      *Compatibility depends on the respective measuring device

      • Tape guide for solid and punched tapes for exact guiding of the measuring product (FISCHERSCOPE® X-RAY® 4000 series) (picture 1 and 2)
      • Device for sample measurements (Fig. 3)
      • Measuring cell for solution analysis of galvanic baths (Fig. 4)
      • Trailing cable up to 30 m (FISCHERSCOPE® MMS® Automation)
      • Calibration fixture for automatic calibration sequence
      • Calibration device for punching grids (FISCHERSCOPE® X-RAY® 4100)
      • Display and keyboard holders
      • Further special requirements after clarification
      Accessories automation