Elliptical Monocapillary

Elliptically shaped X-ray monocapillaries belong to imaging single-bounce optical systems. The spot size is influenced by manufacturing accuracy of the imaging optics (e. g. slope error, straightness etc.) and the characteristics of the source. The main parameters of ellipsoids have to be optimised according to the particular application. Only a definite part of the ellipsoid is used for focussing, because the reflection angle should be lower than the critical angle. For image magnification this part lays between the first focal point where the source is positioned and the maximum diameter of the ellipsoid. For image demagnification the reflection part of the ellipsoid lays behind its maximum diameter.


schematic illustration of an elliptical monocapillary

demagnifying elliptical monocapillary

Specification

Focussing system for µXRD, µXRF and synchrotron radiation


Technical Parameters Elliptical Monocapillary

Source - focus distance 2a, mm    250 ... 15000
Source - entrance distance f1, mm    > 10
Exit - focus distance f2, mm    > 1
Maximal diameter (2b) dmax, µm 50 ... 3000
Entrance diameter D1, µm 50 ... 2000
Exit diameter D2, µm 50 ... 2000
Length L, mm > 20
Energy range, keV XUV ... 30
Optimal source size, µm <
Focal spot size, µm > 10
Housing diameter DHousing, mm > 7
Intensity gain > 50

FISCHER iletişim bağlantınız

Contact

Endüstriyel Segment Ortağı
Yılmer Test ve Ölçü Sistemleri Sanayi ve Ticaret ltd. Şti.
Burhaniye Mah. Fatih Sultan Mehmet Sokak No. 29/5, 34676 Üsküdar, Istanbul
Tel.: +90 216 318 10 01
E-Posta: yilmer@yilmer.com.tr
On-line iletişim formu

Kuyumculuk Segmenti Ortağı
Piramit Teknik Malzeme ve San. Tic. A.Ş
Vizyon Park, C1 blok Zemin kat, No:39-40 Yenibosna, 34197 istanbul
Tel.: +90 2125111186
E-Posta: naim.yuklen@piramtek.com
On-line iletişim formu