Jump to the content of the page

Solve every challenge in coating thickness measurement and material testing

Every measurement task has an ideal solution. Fischer offers the widest range of measurement probes to provide the best measurement results. With decades of experience in numerous industries, Fischer offers quality probes for coating thickness, material composition and electrical conductivity. 

The FMP series instruments are compatible with each probe we manufacture, offering you the versatility you need for a wide range of applications. As the probes are interchangeable, simply connect one to your measuring device to start measuring.

Our probes are able to measure the smallest spots, thin to thick coatings, rough and smooth surfaces to multiple coatings and alloys.

Check out our best-selling probes below!

Features

  • Large variety of high quality measuring probes with different housing shapes and properties
  • Robust, wear-protected probe tips ensure measurement results that remain precise over the long term
  • Spring-loaded system ensures virtually constant contact pressure, even during manual measurement
  • Individual factory calibration of each probe ensures maximum precision
  • Patented conductivity compensation for all amplitude-sensitive eddy current measuring probes prevents influence by different electrical conductivities
  • Probe with curvature compensation for use with the amplitude-sensitive eddy current measurement method

Applications

  • Magnetic induction probes: non-magnetizable coatings on easily magnetizable substrates
  • Amplitude-sensitive eddy current probes: non-magnetic and non-conductive coatings on electrically conductive, non-magnetic substrates
  • Dual probes: measurements on steel and non-ferrous metals
  • Phase-sensitive eddy current probes: electrically conductive, and/or magnetizable coatings on many different substrates
  • Magnetic probes: magnetizable coatings on non-magnetizable substrates and non-magnetizable coatings (particularly thick metal layers) on easily magnetizable substrates
  • Conductivity probes: measurement of the specific electrical conductivity of non-ferrous metals (e.g. aluminum alloys), material mix-up checks or indirect analysis of material properties (e.g. microstructure, degree of purity, hardness) via conductivity measurements
  • Ferrite probes: testing of the ferrite and martensite content on austenitic steels and duplex steels

FGAB1.3

This probe is ideal for measuring electrically non-conductive and non-ferrous metal coatings on steel or iron base materials (ISO/FE and NF/FE). It is well suited for measurements of electroplated metal coating thicknesses such as zinc and chrome.

FTA3.3H

This probe is ideal for measuring electrically non-conductive coatings on non-ferrous metal base materials (ISO/NF). It is highly accurate when measuring thin coatings (e.g. thicknesses between 2 to 5 ยตm). Common applications include paint, varnish or plastic coatings on aluminum, copper or brass.

FD13H

This probe is ideal for measuring coating thicknesses on virtually all metal substrates. Also, it is well suited for measurements on rough surfaces due to the large probe tip.

FS40

This probe measures the electrical conductivity of non-ferrous metals according to the Eddy current method. It is perfect for material sorting, monitoring of heat treatment and analysis of structure conditions. This probe is often used for measuring the electrical conductivity of plated aluminum components in the aerospace industry.

FAI3.3-150

This probe is ideal for measuring electrically non-conducting coatings on non-ferromagnetic metal substrate materials (ISO/NF). It is well suited for measurements in pipes, bore holes, grooves, etc. The smallest permissible inside diameter is 9 mm while the maximum insertion depth is 150 mm.

ESG20

This probe is ideal for duplex measurements on sheet metal with electrolytically or slight hot-dipped galvanized coatings. The individual coating thicknesses of the duplex coating system are measured simultaneously and displayed in the instrument separately. Hot-dipped galvanized zinc coatings without pronounced zinc-iron diffusion zone can also be measured. This probe can also be used as a dual probe with automatically base material recognition under the coating. It is commonly used in the automotive industry.

 

ESL080B

This probe is ideal for measuring copper coating thickness even under thin Sn- or SnPb coating e.g. in metal through-holes in printed circuit boards with a range of 0.8 to 2 mm diameter.

FKB10

This probe is perfect for measuring non-conductive and non-ferrous metal coatings on steel or iron base materials (ISO/FE or NF/FE). It is especially suited for thick coatings and has high measurement precision on rough surfaces.

FA9

This angled probe measures electrically non-conductive coatings on non-ferromagnetic metal substrate materials (ISO/NF). It is especially suited for measuring paint coatings on hot-dipped galvanized steel components with a zinc thickness of > 80 ฮผm.

V7FKB4

This probe is ideal for measuring electrically non-conductive and non-ferrous metal coatings on steel or iron base materials (ISO/FE and NF/FE). It is well suited for the measurement of thin coatings and features unparalled precision when measuring rough surfaces.

Downloads

Name Type Size Download
Jump to the top of the page