Jump to the content of the page

Measure Coating Thickness on PVD-coated Tools

Precise Coating Thickness Measurement on PVD-coated Tools | XRF Analysis

The PVD process

High-precision industrial saws, drills and dies used for the cutting, punching and forming of steel, hard metal or aluminium parts are subject to extreme wear and tear. To increase the service life of these often very expensive tools, they are coated with a hard material coating via a PVD (physical vapour deposition) process. The thickness of the PVD layer determines the durability and therefore the life expectancy of the tool. Tool and die makers must therefore guarantee a minimum coating thickness, requiring high-precision control measurement technology.

Application of PVD Coating on Tools

PVD coatings are physically spattered onto workpiece surfaces in a vacuum furnace. For this purpose, the tools are carefully stacked in a chamber which is then evacuated and heated. Next, the entire setup is bombarded with ions (such as titanium or chromium). With the addition of gases such as nitrogen layers like TiN, CrN, TiCN, etc., are thus evenly deposited onto the tools. Sophisticated workpiece holders within the furnace guarantee that the layers are deposited as evenly as possible over the toolsโ€™ entire surface.

XRF X-ray Fluorescence Analysis for PVD Coatings

Specific process parameters such as vacuum, temperature, ion beam intensity and duration determine the layer deposition process and result in the required thickness. As with all types of coatings, the PVD process must also be closely monitored and the thickness of the PVD-deposited layer measured. Alongside standard destructive testing methods, the non-destructive X-ray fluorescence method (XRF) has found broad acceptance for this purpose. The FISCHERSCOPEยฎ X-RAY XDLM, with its robust design concept, is optimised for these requirements as it combines the high-intensity beam of a micro-focus tube with a small Aperture and large detector window. The salient advantages of this device are:

  • Non-destructive measurements, no damage to valuable workpieces
  •  Fast measurement times
  • Smallest measurement spots: 100 ยตm

The instrumentโ€™s specialisation for this purpose means that layer thickness can be accurately measured on even the finest cutting edges of very high-end tools. Furthermore, using the same instrument, it is possible to determine the base toolsโ€™ precise metallic composition โ€“ e.g. to determine Cobalt leaching when an old coating is chemically removed before a new coating is applied.

XRF Measurement of a TiN Layer on HSS Tool

Example for a TiN coating on HSS tool steel, measured with 10 s measurement time, collimator 0.1 mm on FISCHERSCOPE X-RAY XDLM.

TiN-coating on HSS tools

Coating thickness

Single measurement readings


Average (10 measurements)

3.56 ยตm

Standard variation

0.05 ยตm

Coefficient f Variation

1.47 %

Your Measuring Instrument for the XRF Coating Thickness Measurement of PVD Coated Tools

To determine the thickness of hard coatings on tools and for quality monitoring of the PVD coating process, the FISCHERSCOPEยฎ X-RAY XDLM is the optimal measurement system. For more information, please contact your local Fischer representative.

Jump to the top of the page