XRF measurement of multilayer coatings on sanitary fittings: thickness, composition and process control
Why just a few micrometers can determine the appearance, durability and cost of a component
In the sanitary fittings and metal interior components industry, surface finishing is not merely an aesthetic choice. Behind a bright, uniform surface lies a coating system designed to protect the component, withstand everyday use and retain its color and appearance over time.
Monitoring the thickness and composition of the individual layers therefore means assessing not only the finished product, but also the stability of the process used to manufacture it.
Reliable measurement makes it possible to identify deviations before they result in visible defects, customer complaints, rework or unnecessary material consumption.
Why is total coating thickness not always sufficient?
Cr/Ni/Cu multilayer coatings applied to brass or metallized plastics such as ABS are among the most widely used coating systems for sanitary fittings and decorative components.
Each layer performs a specific function. Copper helps smooth the surface and prepares it for the subsequent deposits. Nickel provides a significant part of the corrosion protection, while chromium completes the system by providing surface hardness, brightness and the required appearance.
However, knowing only the total coating thickness may not be enough. Two components with the same overall thickness may have a different distribution of copper, nickel and chromium and may therefore deliver different performance.
For this reason, it is often necessary to determine the contribution of each individual layer and verify its uniformity at the most critical points of the component.
Which areas of the component should be inspected?
The distribution of an electroplated coating is not necessarily uniform across the entire surface.
Edges, recesses, radii, threads and curved surfaces may receive different amounts of deposited material. A measurement taken at only one point may therefore not accurately represent the whole component.
An effective inspection plan should identify the areas most exposed to potential variations, establish repeatable measuring positions and compare the results over time.
An insufficient coating layer may reduce corrosion protection, compromise the surface appearance or make defects in the substrate visible. Excessive thickness, on the other hand, does not automatically improve quality and may increase processing time, metal consumption and production costs.
The objective is therefore not to deposit more material, but to keep the process within the correct operating window.
How are coating thickness and performance connected?
Technical standards such as ISO 1456 define requirements for decorative nickel, nickel-chromium and copper-nickel-chromium coatings intended to improve both appearance and corrosion resistance.
In the sanitary tapware sector, EN 248 also covers characteristics such as the condition of exposed surfaces, coating adhesion and corrosion resistance.
Coating thickness measurement does not replace corrosion or adhesion testing, but complements it.
Performance tests show how a component behaves under defined conditions. Metrology, on the other hand, helps verify whether the process continues to produce the intended coating system before a deviation becomes visible on the finished product.
What changes when using chromium(III)?
The progressive introduction of trivalent chromium processes as an alternative to traditional hexavalent chromium processes has added further variables to the control of decorative finishes.
Different formulations and deposition parameters can affect color tone, layer distribution and final system performance, even when the components appear visually similar.
In this context, monitoring coating thickness, elemental composition and electroplating process stability becomes particularly important.
XRF technology does not determine the oxidation state of chromium, but it can provide essential information about coating thickness and the elemental composition of the system, supporting effective process control.
How does XRF coating measurement work?
X-ray fluorescence, or XRF, is particularly well suited to the measurement of both single-layer and multilayer metallic coatings.
The method is non-destructive: the component can be analyzed without being sectioned and without altering its surface. In a single measurement procedure, it is possible to determine the thickness of the individual layers and, when required by the application, obtain information about the elemental composition of the materials.
This makes XRF suitable both for high-value components and for statistical inspections performed on samples taken from production.
The technology can be used in the laboratory, during incoming goods inspection or as part of quality assurance activities in production.
However, fast measurement does not mean that the result is automatic. Accuracy depends on the correct setup of the method and on the ability to reproduce the measuring conditions.
Which factors influence the reliability of the result?
The geometry of the component, the measuring spot size, the measuring distance, the substrate material and the sequence of the coating layers can all significantly influence the result.
Sample positioning must also be controlled. A difference in distance or angle between the component and the measuring system may cause variations that are not actually related to the electroplating process.
Reliable results therefore require suitable reference standards, regular verification of instrument stability and clearly defined, repeatable positioning procedures.
The measurement result should be considered the outcome of a complete system comprising the instrument, calibration, measuring method, sample and operator, rather than simply a value displayed on the screen.
From component inspection to process control
Measurement becomes more valuable when results are not considered individually but analyzed over time.
Building a historical data set makes it possible to identify trends, shifts from target values and potential process drift before they result in non-conforming products.
Coating thickness measurement therefore becomes a practical tool for supporting production. The collected data can help optimize electroplating parameters, reduce scrap, limit material consumption and improve repeatability between different production batches.
HELMUT FISCHER develops solutions for coating thickness measurement and material analysis, including XRF configurations designed for Cr/Ni/Cu coating systems on both metallic and plastic components.
The instrument, calibration and measurement plan must always be selected according to the substrate material, the layer sequence and the geometry of the component. Together, these factors determine the reliability of the inspection process.
Perceived quality begins at the surface, but it is created much earlier. In sanitary fittings and interior components, measuring just a few micrometers means protecting product durability, brand image and process profitability.
Do you need to inspect Cr/Ni/Cu coatings on metallic or plastic components?
FISCHER specialists can help you identify the most suitable measuring technology, calibration and configuration for your application.
Discover FISCHER solutions for sanitary fittings and interior components and contact our specialists for expert advice.