Elliptical Monocapillary

Elliptically shaped X-ray monocapillaries belong to imaging single-bounce optical systems. The spot size is influenced by manufacturing accuracy of the imaging optics (e. g. slope error, straightness etc.) and the characteristics of the source. The main parameters of ellipsoids have to be optimised according to the particular application. Only a definite part of the ellipsoid is used for focussing, because the reflection angle should be lower than the critical angle. For image magnification this part lays between the first focal point where the source is positioned and the maximum diameter of the ellipsoid. For image demagnification the reflection part of the ellipsoid lays behind its maximum diameter.

schematic illustration of an elliptical monocapillary

demagnifying elliptical monocapillary


Focussing system for µXRD, µXRF and synchrotron radiation

Technical Parameters Elliptical Monocapillary

Source - focus distance 2a, mm    250 ... 15000
Source - entrance distance f1, mm    > 10
Exit - focus distance f2, mm    > 1
Maximal diameter (2b) dmax, µm 50 ... 3000
Entrance diameter D1, µm 50 ... 2000
Exit diameter D2, µm 50 ... 2000
Length L, mm > 20
Energy range, keV XUV ... 30
Optimal source size, µm <
Focal spot size, µm > 10
Housing diameter DHousing, mm > 7
Intensity gain > 50

Your contact to FISCHER


Partner of Industrial Segments
Sigma Enterprises WLL
PO Box 15784, Alfardan Center, Grand Hamad Street, Doha
Phone: +974 44622614
E-Mail: Manuel.Ramalho@sep.qa
Online contact form

Partner of Jewelry Segment
Qatar Scientific Co WLL
PO Box 41243, Office # 511, 5th Floor Al Retaj Business Center, Rawdat Al-Khail Area B-Ring Road, Doha
Phone: +974 4462 1165
E-Mail: afifi@qsneoscience.com
Online contact form