STEP Test measurement according to ASTM B764 and DIN EN 16866

The STEP Test (Simultaneous Thickness and Electrochemical Potential determination) is a long-standardized method for simultaneously determining individual coating thicknesses and the differences in electrochemical potential between the individual layers of a multiplex nickel coating system. The coating thickness measurement is carried out according to the Coulometric method, while the potential profile is captured using a silver reference electrode coated with AgCl. The potential profile is shown on the display; individual coating thicknesses and differences in potential can be viewed by positioning the cursor correspondingly on the plot.

Schematic diagram of the STEP TEST method.
Schematic diagram of the STEP TEST method.
Schematic diagram of the STEP Test method.

To obtain comparable results with this method, the reference electrode must always be kept the same distance from the specimen; therefore, a special measuring cell is utilized. The silver reference electrode is a cone-shaped ring that forms the lower housing component of the measuring cell, further requiring only the obligatory gasket. This measuring cell design ensures a consistently uniform distance between the reference electrode and the specimen.

Your contact to FISCHER


Partner of Industrial Segments
Sigma Enterprises WLL
PO Box 15784, Alfardan Center, Grand Hamad Street, Doha
Phone: +974 44622614
Online contact form

Partner of Jewelry Segment
Qatar Scientific Co WLL
PO Box 41243, Office # 511, 5th Floor Al Retaj Business Center, Rawdat Al-Khail Area B-Ring Road, Doha
Phone: +974 4462 1165
Online contact form