SIGMASCOPE SMP350
SIGMASCOPE SMP350 is a compact handheld device for determining the electrical conductivity of non-ferrous metals such as aluminum or copper. The measured conductivity further enables you to draw conclusions about the hardness and strength of heat-treated materials. Evidence of heat damage and material fatigue can thus be established. For this, the phase-sensitive eddy current method is used, which is approved for the measurement of conductivity according to DIN EN 2004-1 and ASTM E 1004.

Features:
- Fast, non-destructive and precise measurement of the electrical conductivity of non-ferrous metals according to DIN EN 2004-1 and ASTM E 1004
- Conductivity probes for a range of applications
- Various measurement frequencies for different penetration depths, from 15 kHz to 1 MHz, depending on the probe
- Automatic curvature compensation for known curvature diameters (down to the smallest diameter of 6 mm)
- We offer certified measurement standards (in MS/m, %IACS), which are traceable to internationally recognized calibration standards
Applications:
- Conductivity testing on raw materials for sorting and quality assurance
- Inspection of alloying in coinage (e.g. the conductivity of Euro coins)
- Assessment of the hardness and strength of heat-treated materials
- Control of the material stability of airframes or similar components that can be altered by temperature swings
- Estimation of the phosphorous content in copper alloys or copper-bearing materials
- Tracking of precipitation processes, e.g. in Cu-Cr alloys
- Inspection of the homogeneity of alloys
- Scrap sorting
Your contact to FISCHER

Fischer Technology Inc.
750 Marshall Phelps Rd.
Windsor/United States
Phone: + (860) 683-0781
E-Mail: info@fischer-technology.com
Online contact form