Jump to the content of the page

Our Recorded Webinars

Here you can view the recordings of our past webinars about XRF, tactile measurement, nanoindentation and scratch testing again. Just click on the preview picture that interests you and benefit from our know-how.

X-Ray Webinars

X-RAY โ€“ Setting up measurement equipment monitoring

This webinar will cover the following topics:
- What is measurement equipment monitoring?
- What is needed?
- How to setup?
- How to evaluate?

X-RAY - ZnNi-Fe coating:  Measurement of coating, as well as control of the associated baths

This webinar will cover the following topics:
- Calibration of the coating thickness measurement task
- Available calibration standards
- Measurement of the parts, then demo of the bath analysis

X-RAY โ€“ Smaller, faster and more precise: Polycapillary optics for challenging applications

This webinar will cover the following topics:
- Current challenges of modern strip and wire coatings
- Process control: Proof of measuring instrument capability
- Comparison of XDV-ยต LD vs. XDAL
- Correctly calibrating multilayer coating systems

X-RAY โ€“ Report Documentation

This webinar will cover the following topics:
- Creation of order logs
- Acquisition of data from measurements
- Variable display of measurement variables
- Logging of measurements
- Statistical evaluations of measurements
- Data export

X-RAY โ€“ Calibration and measuring equipment monitoring

This webinar will cover the following topics:
Why calibrate? Measurements with and without calibration
- Calibration - Basics
- What are calibration standards?
- Performing, changing and extending a calibration
- What is a proxy calibration? Advantages and application examples
- Measuring equipment monitoring - what for?
- Carrying out and documenting measuring equipment monitoring

Tactile Coating Thickness Measurement Webinars

Tactile Coating Thickness Measurement โ€“ Handheld Gauge Data Export

This webinar will cover the following topics:
- Ways to export measurement data and files to PC
- Exporting measurement data via the PC-Datex interface program
- Instrument installation, explanation, operation and settings
- Exporting measurement data via FISCHER DataCenter software
- Synchronization of measurement devices with Windows operating system

Tactile layer thickness measurement - Influence of curved surfaces on the measurement results and its compensation

This webinar will cover the following topics:
- Presentation of the FD13H and FTD3.3 probes
- Possible applications of a dual probe
- Influence of the curvature of the measuring object on the measurement
- Compensation of curvature using the FD13H probe as an example
- Compensation of curvature using the FTD3.3 probe as an example

Tactile Coating Thickness Measurement โ€“ FMP Gauge Calibration and its Verification

This webinar will cover the following topics:
- Why calibrate? Why perform corrective calibration? Critical influence factors on the measurement
โ€“ Corrective calibration procedure using the handheld devices FMP40 and FMP100
- Standard verification of a corrective calibration
- Measurement uncertainties of the measurement and calibration standards
- FMP devices with and without application memory
- Influence of the measurement probe on the measurement result
โ€“ Importance of the probe function check

Tactile layer thickness measurement on printed circuit boards

This webinar will cover the following topics:
- Presentation of FISCHERSCOPE MMS PC2
- PCB applications
- Measuring solder resist thickness on copper coating
- Measuring thickness of copper coating
- Measurement of copper thickness in PCB holes
- PCB thickness measurement

Nanoindentation & Scratch Testing Webinars

Nanoindentation - Characterisation of anodised coatings

This webinar will cover the following topics:
Variants of HV hardness measurement with the WIN-HCU of HM instruments
- Measurement in the transverse section and on the component surface
- Measurement in comparison to a reference value

Influences on the measurement results
- Suitable parameter selection - What influence do the measurement parameters have?
- What influence does the roughness have - What remedial measures are available?

Scratch Testing - Scratch testing of layers

This webinar will cover the following topics:
- Presentation of the components of the ST30
- Presentation of the Scratch Test
- How is a scratch test carried out?
- Which parameters are measured?
    Calibration and peak test before measurement
    Influences on the measurement results/characteristic values
- What comparable test methods are there?
- What is the difference between the scratch test and other mechanical test methods?
- Scratch test on coatings from practice

Jump to the top of the page