Sealing Quality Tester

Sealing quality tester for anodic coatings on aluminum according to DIN EN ISO 2931 and ASTM B 457-67

The weather resistance of a finish is a function of sealing quality. According to DIN EN ISO 2931 and ASTM B 457-67, the admittance (Y) of a capacitor in which the anodic oxide film forms the dielectric is a good yard-stick of sealing quality. The ANOTEST® YMP30-S measures the admittance according to standards, and due to its design is ideally suited for on-site testing.

Sealing Procedure for anodic oxide films on aluminum
Sealing Procedure for anodic oxide films on aluminum
Sealing Procedure for anodic oxide films on aluminum.

Measurement procedure

A self-adhesive rubber ring is placed on the surface to be tested and the space so enclosed filled with a few drops of a test fluid. The aluminum substrate is then connected to the earthing socket of the unit and the test electrode dipped into the cell fluid, thereby forming a capacitor in which the anodic film acts as the dielectric. It is the admittance of this capacitor which is measured and directly indicated in μS (microsiemens).

Your contact to FISCHER

Chembo Overfladeteknik A/S.
Kvistgaard/Danmark

Contact directly
Phone: (+45) 49 12 50 10
E-Mail: chembo@chembo.dk
Online contact form

Information