Discover the next generation of tactile coating thickness measurement in
XX Days
XX Hours
XX Minutes
XX Seconds
Helmut Fischer Logo
New level New level New level

The new
DMP series

scroll to start

The new level
is within reach

Reach the next level of tactile and non-destructive coating thickness measurement with the new DMP series. The robust and modern design, intuitive interface and optimized functionalities make these compact handheld devices your perfect companions for any measurement requirement.

DELTASCOPE®
ISOSCOPE®

Helpful control signals

Get important feedback during the measuring process. The multi-sensory live feedback you receive via LED light, sound and vibration indicates whether the measured values are within tolerance.

Optimal handling

Experience the new ergonomic design for a secure grip and easy operation - even with modern work gloves - whether in the station or in your hand.

Powerful rechargeable battery

The high-quality, rechargeable and quick-change lithium-ion battery provides powerful support for more than 24 h at a stretch, making it both economical and long-lasting.

Robust design

The all-aluminum housing (IP64) secured with soft bumpers and the scratch-resistant and chemical-resistant display withstand shocks and external influences.

Cal check function

Get maximum security for your measurement results. The Cal check function quickly checks your currently used calibration at any time.

Launchclip

Tactile and non-destructive coating thickness measurement has just reached the next level. The new DMP series from Fischer sets the standard with its new design and digital probes, as well as the Tactile Suite and many other innovations. Experience the product series.

Digital probes &
F-adapter

Discover our new digital probes. Produced in-house and with proven Fischer quality, you will be ready for any measurement challenge. You can continue to use analog probes by using the F-adapter, thus allowing you to benefit from Fischer's largest probe portfolio on the market.

Best measurement results

Rely on outstanding accuracy and maximum repeatability with probes from Fischer, even for demanding measurement tasks.

Smart connectivity

Benefit from improved connectivity with future-proof USB-C interfaces and possible data transfer via Bluetooth.

Flexible F-adapter

Take advantage of the F-adapter, an accessory that allows you to use the full performance of analog Fischer probes with your new DMP device.

Highest quality

Continue to experience the highest quality and maximum service life with our wear-resistant, serviceable and extremely robust probes (IP65).

Tactile Suite &
connectivity

Experience now how easy managing measurement data can be. Tailored to your needs, Tactile Suite is the most intuitive software in tactile coating thickness measurement. Transferring, evaluating and exporting your data has never been so convenient.

Most powerful software

Get Tactile Suite, your efficient software solution with a new design, innovative user guidance and versatile functions for your evaluation and reporting.

Instantly recognized and synchronized

With the automatic and reliable device recognition, your probes and devices are recognized directly and your measurement data is transferred and stored easily and immediately.

Direct export to Excel

Transfer your measurement data in real time - or after measuring directly to Excel or other file formats - easily and conveniently via USB-C or Bluetooth.

Create data reports easily

Easily create customized reports and measurement logs. You can use our templates for this or adapt them according to your needs.

Workflow

Measuring has never been easier. Get 100 % confidence in just a few steps.

1. Unpack

2. Plug in

3. Calibrate

4. Measure

5. Transfer data

6. Create data report

7. Guarantee quality

Up to any challenge

The new DMP series puts an exclamation mark on tactile and non-destructive coating thickness measurement of ferrous and non-ferrous base materials. Discover the individual models in detail.

Coating ¹ Base Material ¹
ISO
NF
Anod. Coatings
Al
Paint Varnish Plastic
Al Cu CuZn
Coating ¹ Base Material ¹
ISO
FE
NF
FE
Paint Varnish Zn Cr Cu
Steel Fe
Coating ¹ Base Material ¹
ISO
FE
NF
FE
Paint Varnish Zn Cr Cu
Steel Fe
Coating ¹ Base Material ¹
ISO
NF
Anod. Coatings
Al
Paint Varnish Plastic
Al Cu CuZn
DUALSCOPE® Close-Up DUALSCOPE® Materials DELTASCOPE® Close-Up DELTASCOPE® Materials ISOSCOPE® Close-Up ISOSCOPE® Materials
DUALSCOPE® DELTASCOPE® ISOSCOPE®


> 24 h²
Battery life


Aluminum housing
Best quality on the market


Vibration alarm³
Unique limit value monitoring

Take advantage of the flexibility! With the new DUALSCOPE® you can measure non-magnetizable or electrically non-conductive coatings on magnetizable or non-magnetizable, electrically conductive base materials with the eddy current or magnetic inductive measuring method.

¹ ² ³ Show more ¹ ² ³ Show less

¹ ISO = Non-electrically conductive NF = Non-magnetic; FE = Magnetic
² Battery operating time > 24 h at continuous measurement and approx. +20 °C ambient temperature.
³ Vibration alarm available for DUALSCOPE® DMP40, DELTASCOPE® DMP30 and ISOSCOPE® DMP30.


> 24 h²
Battery life


Aluminum housing
Best quality on the market


Vibration alarm³
Unique limit value monitoring

Put an exclamation mark on it! DELTASCOPE® optimizes the measurement of non-magnetizable coatings on magnetizable base materials using magnetic-inductive measurement.

¹ ² ³ Show more ¹ ² ³ Show less

¹ ISO = Non-electrically conductive NF = Non-magnetic; FE = Magnetic
² Battery operating time > 24 h at continuous measurement and approx. +20 °C ambient temperature.
³ Vibration alarm available for DUALSCOPE® DMP40, DELTASCOPE® DMP30 and ISOSCOPE® DMP30.


> 24 h²
Battery life


Aluminum housing
Best quality on the market


Vibration alarm³
Unique limit value monitoring

Discover the new benchmark! With the new ISOSCOPE® you increase the efficiency in measuring electrically insulating coatings on non-magnetizable, electrically conductive metals with the amplitude-sensitive eddy current method.

¹ ² ³ Show more ¹ ² ³ Show less

¹ ISO = Non-electrically conductive NF = Non-magnetic; FE = Magnetic
² Battery operating time > 24 h at continuous measurement and approx. +20 °C ambient temperature.
³ Vibration alarm available for DUALSCOPE® DMP40, DELTASCOPE® DMP30 and ISOSCOPE® DMP30.

Take a look into the housing of the DMP series

Discover the powerful models of our DMP series. See them here at a glance or view the download .

DUALSCOPE® DELTASCOPE® ISOSCOPE®
Model DUALSCOPE®
DMP 20
"Entry-level model"
DUALSCOPE®
DMP 40
"Comfort model"
DELTASCOPE®
DMP 10
"Entry-level model"
DELTASCOPE®
DMP 30
"Comfort model"
ISOSCOPE®
DMP 10
"Entry-level model"
ISOSCOPE®
DMP 30
"Comfort model"
Application Measurement of non-magnetizable or electrically non-conductive coatings on magnetizable or non-magnetizable, electrically conductive base materials Measurement of non-magnetizable coatings on magnetizable base materials. Measurement of electrically insulating coatings on non-magnetizable, electrically conductive metals.
Base material Non-ferrous metal (NF) and steel or iron (FE) Steel or iron (FE) Non-ferrous metal (NF)
Application examples
  • Paint, lacquer or plastic coatings on aluminum, copper or brass (ISO/NF)
  • Anodized coatings on aluminum (ISO/NF)
  • Zinc, chrome, copper coatings on steel or iron (NF/FE)
  • Paint, lacquer, plastic coatings on steel or iron (ISO/FE)
  • Zinc, chrome, copper coatings on steel or iron (NF/FE).
  • Paint, lacquer, plastic coatings on steel or iron (ISO/FE)
  • Paint, lacquer or plastic coatings on aluminum, copper or brass (ISO/NF)
  • Anodized coatings on aluminum
Measuring method Amplitude sensitive eddy current method AND Magnetic inductive measuring method Magnetic inductive measuring method Amplitude sensitive eddy current method
Measured value memory ≤ 10,000 ≤ 250,000 ≤ 10,000 ≤ 250,000 ≤ 10,000 ≤ 250,000
Number of measurement tasks 1 ≤ 2,500 1 ≤ 2,500 1 ≤ 2,500
Communication USB-C USB-C and Bluetooth USB-C USB-C and Bluetooth USB-C USB-C and Bluetooth
Limit monitoring Light and sound Light, sound and vibration Light and sound Light, sound and vibration Light and sound Light, sound and vibration
Standards DIN EN ISO 2178, DIN EN ISO 2360, ASTM D7091, ASTM 4471 DIN EN ISO 2178, ASTM D7091, ASTM 4471 DIN EN ISO 2360, ASTM D7091, ASTM 4471

Accessories

Find helpful, optional add-ons for your DMP device.

Halter

DMP10-40 holder

F-adapter

DMP F-Probe adapter

Akku

DMP RRC1130 Li-ion battery

Ladegerät

Charger for RRC1130 Li-ion battery

Kalibrierfolien

Calibration foils

Stativ manuell

Measuring stand V12 BASE (manual)

Stativ motorisch

Measuring stand V12 MOT (motorized)

Experience the new level

Get to know the new DMP series without any obligation. We will gladly introduce it to you.

What are you interested in?

Feel free to leave your contact information. We will get back to you as soon as possible.

DUALSCOPE® Front
DELTASCOPE® Front
ISOSCOPE® Front